- Environmental Procedures
- Environmental Compliance Officers
- Environmental Compliance Database (ECD)
- Safeguarding the Environment Over the Program Cycle
- Sectoral Environmental and Social Best Practices
- Biodiversity and Tropical Forest Analyses
- Training: Courses and Calendar
- Laws, Regulations and Policies
- Foreign Language Resources
- USAID Bureaus
- Safeguarding the Environment: Mission Support
- Europe & Eurasia
- Global Health
Speeches Shim
Purpose. The Sector Environmental Guidelines present information on common USAID development actions regarding:
- the typical, potential adverse impacts of activities in these sectors;
- how to prevent or otherwise mitigate these impacts, both in the form of general activity design guidance and specific design, construction and operating measures;
- how to minimize vulnerability of activities to climate change; and
- more detailed resources for further exploration of these issues.
Environmental Compliance Applications.
The Sector Environmental Guidelines series directly support environmental compliance by providing: information essential to assessing the potential impacts of activities, and to the identification and detailed design of appropriate mitigation and monitoring measures.
However, the Sector Environmental Guidelines are not specific to USAID’s environmental procedures. They are generally written and are intended to support the general environmentally and socially sustainable approaches to common sectors, regardless of the specific environmental requirements, regulations, or processes that apply, if any. Site specific context must be considered when using these guidelines and additional or modified impacts and mitigation measures may be required.
Sector Environmental Guidelines
CBNRM
Community-based natural resources management (CBNRM) attempts to address the problems of poverty and natural resource degradation simultaneously, even though their solutions are often seen as being in direct conflict. CBNRM is premised on the idea that communities will sustainably manage local resources if they:
- are assured of their ownership of the natural resource;
- are allowed to use the resources themselves and/or benefit directly from others’ use of them; and
- are given a reasonable amount of control over management of the resources.
The CBNRM chapter of the EGSSAA describe promising approaches to mitigating or preventing environmental damage to commonly managed or owned resources. Under CBNRM, local communities benefit from the sustainable use of natural resources. Although core principles and elements of CBNRM have been identified, they are still new and evolving. There are many adaptations, depending on variations in locations and legal, social, political and economic contexts. USAID, along with many other international NGOs, has sponsored, facilitated, and catalyzed many current CBNRM projects.
NOTE: this document is part of the older Environmental Guidelines for Small Scale Activities in Africa (EGSSAA) series, one of the predecessors to the Sector Environmental Guidelines (SEGs). It is provided as no Natural Resource Management SEG is currently available.
Construction
Virtually all small-scale development activities—including aspects of housing, sanitation, water supply, roads, schools, community centers, storage silos healthcare, energy—involve construction. USAID’s global construction and rehabilitation portfolio includes small projects (e.g., individual water wells, clinics, latrines);large projects (e.g., roads, hospitals); projects in which construction is the primary activity (e.g., buildings, water infrastructure, transportation, energy, solid waste management, communication, recreation); and projects in which construction is a minor component in support of other project components (e.g., rehabilitation in health and education).
Construction projects may generate many types of environmental and social impacts. Considering environmental and social issues across the life cycle is essential, including during planning, engineering design, the use or operational phase, and the decommissioning phase. Addressing these phases during engineering design and in the environmental impact assessment is the most effective approach to managing potential impacts.
The construction SEG aims provide guidance on impact assessment and mitigation for the design, siting, building, maintenance, occupation, and use of infrastructure developed as part of USAID’s global construction portfolio. This guidance provides an equal emphasis on the management of environmental and social aspects for a successful and sustainable project.
Crop Production
USAID seeks to facilitate inclusive and sustainable agricultural productivity growth to lift people out of extreme poverty and hunger, giving them the ability to move beyond subsistence and engage in their local, national, and/or global economies.
Best achieving these critical development objectives requires that the potential adverse environmental and social impacts of crop production and activities across the agricultural value chain be anticipated and mitigated in program design and implementation. Such potential impacts include but are not limited to land and water degradation to occupational health and safety, child labor, and social displacement.
This Crop Production Sector Environmental Guideline supports identification and mitigation of these impacts.
Dryland Agriculture
The world’s drylands include hyperarid, arid, semi-arid and dry subhumid areas where rainfall is highly variable, droughts are common and water is the principal limiting factor for agriculture. Dryland soils, which are characterized by low levels of moisture, organic matter, and biological activity, often display poor fertility. When inappropriately utilized for agriculture, dryland soils are susceptible to rapid fertility loss, erosion, desertification, and salinization.
Sustainable land management (SLM) practices aim to prevent and mitigate the impacts associated with inappropriate agriculture in drylands by managing agro-ecosystems for sustained productivity, increased profits, and improved food security whilst reversing and preventing water stress, soil erosion and desertification.
This guideline details how conservation agriculture, rain water harvesting, agroforestry (especially with indigenous trees), the use of cross-slope barriers, integrated soil fertility management, integrated crop and livestock management, sustainable forest management, and improved irrigation design can all be employed. When these strategies are effectively implemented, in combination or alone, they can help conserve water, enhance soil fertility, improve crop water-use efficiency, and boost rangeland health, while preventing the unintended negative consequences associated with dryland farming.
Ecotourism
Ecotourism can contribute to economic development and the conservation of protected areas by generating revenues that can be used to sustainably manage protected areas, and by providing local employment and a sense of community ownership. However, without careful planning and management that balances ecological, social, and economic objectives, ecotourism can easily cause environmental damage.
The Ecotourism chapter of the EGSSAA describes how to anticipate and mitigate adverse environmental impacts so that ecotourism projects:
- increase socioeconomic benefits to communities and landowners;
- sustainably manage the environment;
- raise awareness of and support for conservation, and
- increase a community’s capacity to conserve and manage natural resources outside protected areas.
NOTE: this document is part of the older Environmental Guidelines for Small Scale Activities in Africa (EGSSAA) series, one of the predecessors to the Sector Environmental Guidelines (SEGs). It is provided as no Tourism SEG is currently available.
Energy
Renewable energy can have numerous benefits, such as increased energy access in developing countries, public health improvements, climate change mitigation, etc. However, for those benefits to be realized, several sustainability considerations must be addressed in the design. This guideline is intended to inform developers and implementers of small-scale energy projects about environmentally sound design (ESD).
Forestry
Forestry is the science and practice of managing trees and forests to provide a diverse range of ecosystem goods and services. The Forestry Sector Environmental Guideline provides information on environmental and social impacts, mitigation measures, and environmentally sound design and management (ESDM) best practice for the types of forestry projects typically funded by USAID.
This document was prepared to help Missions comply with Section 117 of the Foreign Assistance Act (FAA) and Title 22 of the Code of Federal Regulations (CFR) Section 216 (22 CFR 216), which require that environmental impact assessments be conducted, and mitigations implemented, for all USAID projects. It seeks to ensure awareness of Section 118 of FAA and other relevant legislation that pertains to tropical forests.
The guideline is also intended to help USAID partners and staff design forestry activities that reduce greenhouse gas emissions and minimize the vulnerability of people, ecosystems and the project itself to climate change, all of which are important aspects of 22 CFR 216.
Small Healthcare Facilities
Small-scale healthcare facilities play a vital role in public health and are a key part of integrated community development. The staff at rural health posts (including immunization and reproductive health posts), mobile and emergency healthcare programs, urban clinics and small hospitals are not only tasked with treating the sick. They are also responsible for disease prevention, and health communication and education and serve as the front line of defense against epidemics such as AIDS, malaria, and cholera. Health service professionals at these facilities provide family planning, nurture child and adult health, prevent disease, cure debilitating illnesses, and alleviate the suffering of the dying.
However, environmentally poor design and management of these facilities can adversely affect patient and community health countering the very benefits they are intended to deliver. This Small Healthcare Facilities Sector Environmental Guideline describe the mechanisms by which environmental and health risks arise and recommends mitigation and monitoring measures to reduce them and otherwise strengthen project outcomes. It also includes a number of checklists for environmentally sound design and management (ESDM) of small health facilities.
Healthcare Waste
Small-scale healthcare activities, such as rural health posts, immunization posts, reproductive health posts, mobile and emergency healthcare programs, and urban clinics and small hospitals, provide important and often critical healthcare services to individuals and communities that would otherwise have little or no access to such services. The medical and health services they provide improve family planning, nurture child and adult health, prevent disease, cure debilitating illnesses, and alleviate the suffering of the dying.
Currently, little management of healthcare wastes occurs in many small-scale facilities in developing countries. Training and infrastructure are minimal. A common practice in urban areas is to dispose of healthcare waste along with the general solid waste or, in peri-urban and rural areas, to bury waste, without treatment. In some cities and towns, small hospitals may incinerate waste in dedicated on-site incinerators, but often fail to operate them properly. Unwanted pharmaceuticals and chemicals may be dumped into the local sanitation outlet, be it a sewage system, septic tank or latrine. These practices present often significant risks to health. This Healthcare Waste Sector Environmental Guideline provides information on how to mitigate these and other environmental hazards related to healthcare waste management activities.
Housing
Shelter is a basic human need. Thus, providing adequate housing is a fundamental development objective but it is also highly complex. Successful housing activities can rarely be isolated from the development of associated infrastructure—e.g., water, sanitation, transport—and social services.
The Housing Sector Environmental Guideline focus on housing reconstruction after natural disasters that must be carried out in highly difficult circumstances and there are expectations to be operational very quickly. The Guideline does not address technical standards for construction of housing units, water supply and treatment, etc. Instead, its purpose is (1) to convey the full range of environmental and environmental health issues associated with housing construction, and (2) to provide a guided framework for considering these issues in the siting, design and implementation of housing projects, particularly in post-disaster reconstruction and in risk-prone areas.
Note: It is highly recommended that readers review additional Sector Environmental Guidelines in this series as much of their content has implications for housing activities: Water and Sanitation, Solid Waste, Rural Roads, and Construction.
Integrated Pest Management
Integrated pest management (IPM) is defined as a farmer-based and knowledge-intensive management approach that encourages natural and cultural control of pest populations by anticipating pest problems and managing their numbers to reduce losses, while permitting safer pesticide uses where justified and permitted. Many indigenous, as well as newly-developed, non-chemical techniques are available for use. These include combinations of biological control, habitat manipulation, soil health management, use of resistant varieties, and modification of cultural practices (expanded upon below). IPM focuses on long-term prevention of pests and their damage and is USAID policy. Pesticides are considered curative, and generally should be used as a last resort.
USAID’s IPM Sector Environmental Guidelines are designed to encourage the use of natural and cultural pest management tactics to the extent possible while permitting the safe integration of pesticides, as needed, with farmers’ traditional cropping and pest management systems.
NOTE: this document is part of the older Environmental Guidelines for Small Scale Activities in Africa (EGSSAA) series, one of the predecessors to the Sector Environmental Guidelines (SEGs). It is provided as no IPM SEG is currently available.
Livestock
The use of cattle, sheep, goats, pigs, poultry, and other livestock offer many benefits to the growing global population and millions of farmers in the developing world. These animals are integral to rural livelihoods and local cultures, providing food (meat, eggs and other dairy products), materials (wool, hide, horns, etc.), income, and mechanical power for pulling carts, drawing water or plowing fields.
Livestock manure can serve as a source of fertilizer. Grazing can help sustain vegetation and promote biodiversity by dispersing seeds, controlling shrub growth, breaking soil crusts, stimulating grass growth and improving seed germination. Livestock may also represent savings and currency or have cultural value.
Properly managed, livestock production can enhance land and water quality, biodiversity, and social and economic well-being. However, when improperly managed, livestock production may cause significant economic, social and environmental damage. Increasing livestock production has the potential to increase environmental harm. This Livestock Sector Environmental Guideline helps identify potential adverse environmental impacts and mitigation and monitoring options to address them.
Micro and Small Enterprises
- Introduction – MSEs and the Environment (2006)
- Mechanisms for MSEs to Control Environmental Impact (2006)
- Institutionalizing Environmental Capacity (2006)
- Sub-Sector Briefings
- Brick and Tile Production (2013)
- Food Processing (2013)
- Leather Processing (2013)
- Metal Finishing (2013)
- Wet Textile Operations (2013)
- Wood Processing (2013)
- Resources (2006)
- Annexes (2006)
Artisanal and Small-Scale Mining
USAID’s Artisanal and Small-Scale Mining Sector Environmental Guideline (SEG) are designed for project managers, project implementers, practitioners, or others working on artisanal and small-scale mining (ASM) issues and in ASM communities.
This SEG for ASM introduces the range of possible impacts, particularly environmental, health, and socio-political, and explains how project managers and others can support prevention and/or mitigation through project design, environmental review, and during the development of site-specific Environmental Mitigation and Monitoring Plans (EMMPs). This guideline is also intended to help USAID partners, staff, and other practitioners understand climate change impacts to and from ASM activities. Finally, the references section of the document lists cited documents as well as additional resources and references on this topic.
Rural Roads
USAID support for rural roads is generally confined to the development or rehabilitation of one- or two-lane roads. These may be constructed to provide farmers access to markets or to increase community access to services, such as health care or schools. In some cases, USAID may also provide support to improve roads in or leading to protected areas to support sustainable management.
USAID’s Rural Roads Sector Environmental Guidelines describe:
- Common types of environmental damage from road projects.
- Proper planning of road projects to avoid environmental degradation.
- Putting operation and maintenance programs into effect to prevent and mitigate environmental impacts.
- Best means of decommissioning roads to prevent erosion and loss of resources.
Safer Use Pesticides
This Safer Pesticide Use Sector Environmental Guideline provides guidance on maximizing the safety of pesticide use when such use is unavoidable.
NOTE: this document is part of the older Environmental Guidelines for Small Scale Activities in Africa (EGSSAA) series, one of the predecessors to the Sector Environmental Guidelines (SEGs). It is provided as no Pesticide Safer User SEG is currently available.
Primary and Secondary Day Schools
Formal education is essential to social and economic development, and school facilities are essential to formal education. USAID’s support to the education sector often includes funding for the construction, expansion and/or rehabilitation of schools.
Environmentally sound design and management (ESDM) of schools is essential to creating a school environment that facilitates learning, safeguards the health and safety of students, reinforces the basic hygiene behaviors that are important to public health; and to assuring that school facilities will be durable, returning social benefits over many years on the substantial investment they represent.
Gaps in design and management can result in environmental and health risks that may diminish or negate many of the benefits schools are intended to deliver: This School Sector Environmental Guideline describes how these potential effects and outcomes arise and recommends mitigation and monitoring measures to prevent or reduce them, both in design and operation. As in other sectors, effective mitigation is much easier when potential adverse outcomes are identified and addressed early in the design and construction process.
Solid Waste
Rapid growth in global population, urbanization, economic growth and a burgeoning middle class, are expected to lead to a correlative increase in waste generation focused in urban areas of the developing world. At the same time, shifting patterns of production and consumption are leading to greater complexity in managing waste. Faced with such trends, and lack of funding and capacity, many solid waste management authorities in such areas will find it increasingly challenging to provide necessary services, infrastructure and facilities, while addressing the associated threats to public health, society and the environment. In this context, USAID’s role in supporting the development of sustainable waste management projects, programs and activities offers significant potential for achieving a wide range of benefits, including minimizing public health risks and environmental impacts and enhancing sustainability.
These Sector Environmental Guidelines provides an overview of the solid waste management sector, types of waste, systems for reducing, collecting, treating and disposing wastes, and the planning and implementing of such systems. Additionally, these Guidelines introduce and outline potential environmental and social impacts, and climate change risks, associated with the solid waste management sector and discusses potential mitigation and management measures to address these impacts and risks.
Water Supply and Sanitation
Wild Caught Fisheries and Aquaculture
The global fish production has grown steadily for decades to a total of 167 million metric tons (MT) in 2014, with fisheries accounting for 93.4 million MT and aquaculture contributing 73.8 million MT. Increasing demand for seafood from developing countries has increased pressure on the sustainability and resilience of both fisheries and aquaculture systems.
USAID investments in wild-caught fisheries and aquaculture (or “farmed” fish) are made in the context of international, national, and agency guidelines, agreements, and policies. These policies represent the governance framework within which USAID projects in the fisheries and aquaculture sector are designed, implemented, and evaluated for responsible environmental stewardship. USAID’s Wildcaught Fisheries and Aquaculture Sector Environmental Guideline describes these policies and identifies potential environmental impacts in this sector, and potential design and mitigation measures to address them.
Advisory. The Guidelines are advisory only. They are not official USAID regulatory guidance or policy. Following the practices and approaches outlined in the Guidelines does not necessarily assure compliance with USAID environmental procedures or host country environmental requirements. Further, The Guidelines are not a substitute for detailed sources of technical information or design manuals. As needed, users are expected to refer to the included references for additional information.
Comments and corrections. Each sector of these guidelines is a work in progress. Comments, corrections, and suggested additions are welcome. Email: environmentalcompliancesupport@usaid.gov.
Comment
Make a general inquiry or suggest an improvement.